| Product Image |
Item Name+ |
Price |
 |
Replacement cutting strip material for GCC cutters. 1 - 10 meter roll |
$60.00
Add:
|
|
Replacement cutting stip for GCC cutters. |
$6.95
Add:
|
|
Replacement 24" cutting stip for GCC cutters. 2 - 24" strips are included in this pack. |
$10.95
Add:
|
 |
This is a non-OEM replacement blade holder for the CriCut cutters. This particular blade holder allows you to use Roland blades such as the 60 for... |
$28.00
Add:
|
 |
This is a non-OEM replacement blade holder for the GCC cutters. Works with the following cutters: Expert 24, Expert 24LX, Bengal, Expert Pro, Puma... |
$40.00
... more info
Sold Out
|
 |
This is a non-OEM replacement blade holder for the Graphtec cutters. This particular blade holder allows you to use Roland blades such as the 60S... |
$40.00
Add:
|
 |
This is a non-OEM replacement blade holder for the Roland cutters. |
$38.00
Add:
|
 |
Blade Holder US Cutter MH Series Non-OEM |
$15.00
Add:
|
 |
Carriage PCB Assembly (Puma II 30/60) Part# 29001484G |
$15.00
Add:
|
 |
Roland 60 SG blade for course materials like GlitterFlex Ultra. This blade has a higher carbide level and will last longer for cutting Glitter and... |
$17.95
Add:
|
|
Roland 60 thinned blade When cutting thick rhinestone template material such as Sticky Flock™ this blade requires less downforce than other blades.... |
$17.95
Add:
|
 |
GCC 60 2.5mm blade for GCC Expert II, Puma IV, Jaguar V, AR-24, and iCraft cutters. General use 60 degree blade. This is the thicker circumference... |
$17.95
Add:
|
|
Roland 65 Special 2.5 blade for GCC Expert II, Puma IV, Jaguar V, AR-24, and iCraft cutters. Rhinestone Template blade. This is the thicker blade... |
$17.95
Add:
|
 |
Control Panel PCB Assembly Sable 60 - 29000871G |
$10.00
Add:
|
 |
GCC Assist Roller/Holder Assembly - Expert, Puma, Jaguar Part# 290067510G |
$5.00
Add:
|
 |
OEM Ball point pen Holder for GCC Cutters. |
$22.00
Add:
|
 |
Refill Pen for GCC Ball Point Pen holder Buy a pack of 5 and save. |
$2.00
... more info
|
 |
GCC iCraft Impact-Engraving Tip Assembly with holder. (include tip and tool holder) |
$22.00
Add:
|
 |
GCC Blade Holder Plastic for the 2016 models. Works with the following cutters: iCraft, Expert II, Expert II LX, AR-24 290097910G |
$35.00
Add:
|
 |
This is an OEM GCC Metallic Black Blade holder for the RXII/Jaguar V/AR/EXII/i-Craft/Puma IV cutter. 290098460G |
$90.00
Add:
|
 |
Carriage Assembly w/o PCB, Bobcat/Sable/Expert 24/Expert II #29002796G |
$85.00
Add:
|
 |
Carriage Assembly w/o PCB, Expert 24 LX/Expert II LX #29006172G |
$115.00
Add:
|
 |
GCC Carriage Cover Bengal, Expert Pro, Puma |
$10.00
Add:
|
 |
GCC Carriage PCB Board Assembly, Puma III, Expert 24LX, Expert II-24LX (models without AAS) #29001549G |
$18.00
Add:
|
 |
GCC AASII Carriage PCB Board Assembly, Puma III, Expert 24LX, Expert II-24LX #29004514G |
$28.00
Add:
|
 |
GCC Carriage PCB (Jaguar II) Part# 29000570G |
$24.00
Add:
|
 |
GCC AASII Carriage PCB Board Assembly Jaguar IV Part# 29004369G |
$34.00
Add:
|
 |
GCC Jaguar Carriage Assembly (J5LX) Part# 290094060G Before(61LX,S70602)(101LX,R88289)(132LX,R70069)6mm |
$210.00
... more info
Sold Out
|
 |
Lower Carriage Roller Assembly for Jaguar II-IV #290072830G |
$9.00
Add:
|
 |
Jaguar Carriage Guide Roller - Upper If you have skips or jagged cuts in your vinyl, it could be the guide rollers on the carriage. There are 4 guide... |
$13.00
Add:
|
 |
GCC Jaguar IV lever handle. |
$7.00
Add:
|
 |
This is an OEM GCC 45° blade, known as the Red Cap with 0.25 mm offset. This blade is used for cutting thick fluorescent and reflective vinyl.... |
$22.00
Add:
|
 |
This is an OEM GCC 45° blade, known as the Red Cap with 0.25 mm offset. It's the thicker 2.5mm shaft for the Expert II, Puma IV, Jaguar V,... |
$22.00
Add:
|
 |
This is an OEM GCC 60° blade, known as the Blue Blade with 0.25 mm offset. This is the thicker 2.5mm shaft for the Expert II, Puma IV, Jaguar V,... |
$22.00
Add:
|
 |
This is an OEM GCC 60° blade, known as the Green Cap with 0.5 mm offset. This blade is used for cutting reflective vinyl, cardboard, sandblast,... |
$22.00
Add:
|
 |
This is an OEM GCC 60° blade, known as the Green Cap with 0.5 mm offset. This is the thicker 2.5mm shaft for the Expert II, Puma IV, Jaguar V,... |
$22.00
Add:
|
 |
GCC Paper Sensor Assembly- Expert Pro, Puma, Bengal GCC Part # 29004852G |
$18.00
Add:
|
 |
GCC Pinch Roller - All Jaguar Series/Ultra |
$20.00
Add:
|
 |
GCC Pinch Roller - Lynx/Bobcat/Expert Pro/Puma II/Puma III |
$16.00
Add:
|
 |
GCC Pinch Roller - Sable/Bengal/Expert/Expert LX |
$18.00
Add:
|
home
shop
